Jump to content

Can´t seem to get it right with rendering in autocad, need help


miroslav_s

Recommended Posts

Hi,

 

 

 

I reallydon´t get it. What am I doing wrong? I get totally wrong result when rendering.I put two links so that you can see what I mean. The first link(http://prntscr.com/3sureb ) is showing theobject (car) as it looks like in autocad when I work with it and here it lookjust fine. As materials I used PLASTIC LATEX (http://prntscr.com/3sv24a) and PLASTIC RED ON (http://prntscr.com/3sv2bq) . The reason Iused high transparency for material Latex is so that the brakingsystem on thecar can be seen better. BUT as you can see the result is very bad http://prntscr.com/3suyky

So what amI doing wrong? I tried to upload the file here but that didn´t work so I put the download link for those who want to take a look at the file : https://dl.dropboxusercontent.com/u/8906158/mojdeo.dwg

PS: I tried with two different computers and got the same result

 

Thanks in advance and best regards to you all

Miro

Link to comment
Share on other sites

Try adjusting the refraction for the material on the car body.

 

 

 

 

maybe 1.0-air?

Edited by The Ninja Style
Link to comment
Share on other sites

First ofall thank you for helping me. You can see on this links below what I´m trying toachieve. I made those Changes like you said. Theresult is much better but still not the way I want it. http://prntscr.com/3tdthz

Why can´tthe result be like in autocad MODEL : http://prntscr.com/3tdtzu

THIS ISWHAT I WANT IT TO LOOK LIKE.It is from a website http://prntscr.com/3tduwm

If you haveany more suggestions please tell me. Best regards and thank you for trying

Miro

Link to comment
Share on other sites

Yes !!! I figuredit out finally what the problem was. Well, I´m a little ashamed to tell youabout my big mistake! I adjusted render quality to 5, set it to PRESENTATION inRender Presets Manager and in Adjust Rendered Exposure set the Brightness to 40and the result got finally much better. Need to do some more testing to get itright but finally. Thank you both for helping me BUT I did I big mistake byforgetting to set the render to PRESENTATION

Thanks again!

Bestregards to you both!

Miro

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...