helpme Posted September 11, 2014 Share Posted September 11, 2014 Hi everyone ... Just a question about plotting I had a drawing in Meter and i took to my layout A1 paper and in my pagesetup manager i set my plot scale to 1:1 and then my viewport scale i changed my scale to make sure my drawings fit in paper but it keeps on going out of paper.. Then i copied the file which i wanted from the drawing opened acadiso template which is default in MM then i set my plot scale 1:1 then i set my viewport scale to 1:200 it fit in my A1 paper am i doing right or am i doing stupidly,,, Please help .... Quote Link to comment Share on other sites More sharing options...
ReMark Posted September 11, 2014 Share Posted September 11, 2014 So far it sounds right to me. If you are still having problems attach a copy of the drawing to your next post and someone here will take a look at it. Quote Link to comment Share on other sites More sharing options...
nukecad Posted September 11, 2014 Share Posted September 11, 2014 Make sure that you have "Centre the Plot" set in your plot dialogue. Quote Link to comment Share on other sites More sharing options...
eldon Posted September 11, 2014 Share Posted September 11, 2014 AutoCAD plots in mm, and your drawing units are metres (I think). Somewhere you will have to factor in that your drawing unit equals 1000 plotting units. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.