Jump to content

Civil 3D Running Very Slow


dil45

Recommended Posts

Hi All.

i have recently buy Asus N550JK CM316H (16 gb Ram,4 GB Geforce dedicated Graphic,Core i7,2.50GHZ,1 TB Hard,Win 8.1 64bit).

After purchasing i had to intalled some Softwares but some application were not running well,then i Refresh my PC and install agin softwares now every thing is sported but some softwares (Civil 3D,3D Max) is running slow.

Kindly Help me is anay body has solution to make my applications running fast.

 

THX,

Dilshad

Link to comment
Share on other sites

in civil 3d acceleration is Enabled (Option>System>Graphic Performance) but have still problem.

Effects:

ACAD_LineSmoothing supported turned on

ACAD_PerPixelLighting supported turned on

ACAD_AdvancedMaterial supported turned on

ACAD_FullShadows supported turned on

ACAD_TextureCompression supported turned off

Link to comment
Share on other sites

Do you have the latest drivers installed for your graphics card?

 

Did you disable the InfoCenter (also referred to as the CommCntr)?

 

Is this a standalone computer or are you working off a network?

Link to comment
Share on other sites

i have recently buy Asus N550JK CM316H (16 gb Ram,4 GB Geforce dedicated Graphic,Core i7,2.50GHZ,1 TB Hard,Win 8.1 64bit).

After purchasing i had to intalled some Softwares but some application were not running well,then i Refresh my PC and install agin softwares now every thing is sported but some softwares (Civil 3D,3D Max) is running slow.

 

What do you consider to be slow performance?

What are you doing when the slow down occurs and what is happening on screen?

What sort of files are you working on? Filesize? Complexity?

 

Your computer specs appear to be more than good enough for running 3ds Max, so I'm not sure why you're having difficulty? Are you trying to work on huge models with millions of polygons?

Link to comment
Share on other sites

Do you have a model on the video card? or a clock speed. Sometimes some cards have overclocked speeds and can become unstable. Most that come with a default overclock setting have a small switch close to the input power cables.

 

Also, as awful as this sounds, the computer itself could just be faulty in some way.

Link to comment
Share on other sites

its normal work like Cross sections,Volume calculation,corridors.

During working feel sleepy because my cursor works slow Zoom in/Out Slecting items /copy/move Editing etc.

All other software's are working well.

Link to comment
Share on other sites

You artfully avoided answering a handful of questions put to you so unless we start getting some answers it will be difficult if not impossible to provide further help.

 

And while you are at it, disable the InfoCenter too then get back to us.

Link to comment
Share on other sites

Driver Detail.

Nvdia Geforce GTX 850m

Driver Version=340.52

Direct 3D Api Version=11.1

CUDA Core=640

Graphic Clock=901 MHz

Memory Data Rate=200 MHz

Memory Interface=128-bit

Memory Bandwiyh=32.03

total available graphic memory=12229 MB

Dedicated Video memory=4.96 mB DDR3

 

Shared system memory=8133 MB

video Bios Version=82.07.2A.00.02

Bus=PCI Express x16 Gen3

Device ID=10DE 1391 11CD1043

PArt Number=27030010

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...