basty Posted October 26, 2014 Share Posted October 26, 2014 Can anyone make a cad model of elbow fitting like this one in autocad? elbow cad Thank you Quote Link to comment Share on other sites More sharing options...
nestly Posted October 26, 2014 Share Posted October 26, 2014 For a hollow elbow, SWEEP a REGION along a POLYLINE path. For a solid elbow, SWEEP a CIRCLE along a POLYLINE path Quote Link to comment Share on other sites More sharing options...
ReMark Posted October 26, 2014 Share Posted October 26, 2014 Now you need to model a reducing elbow basty. Quote Link to comment Share on other sites More sharing options...
basty Posted October 26, 2014 Author Share Posted October 26, 2014 For a hollow elbow, SWEEP a REGION along a POLYLINE path. For a solid elbow, SWEEP a CIRCLE along a POLYLINE path [ATTACH=CONFIG]51394[/ATTACH] What is the radius of the arc of the polyline? Where the center point is located? What is the inner and outer diameter of the hollow circle? Quote Link to comment Share on other sites More sharing options...
ReMark Posted October 26, 2014 Share Posted October 26, 2014 All the questions you asked are available in any good pipe fittings catalog or online. You need to learn how to do research as well as model. Are you going to model metric or imperial fittings? Quote Link to comment Share on other sites More sharing options...
nestly Posted October 26, 2014 Share Posted October 26, 2014 In your link, Z height appears to be the take-off and B height would appear to be the socket depth... Z+B would be the face to center. The inside diameter is whatever the standard OD is for that pipe size. All the other dimensions are subject to the manufacturer's specification. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.