artemisrpg Posted November 18, 2014 Share Posted November 18, 2014 Help would be appreciated. Quote Link to comment Share on other sites More sharing options...
nestly Posted November 18, 2014 Share Posted November 18, 2014 The hidden lines for the holes are missing and the top view shows an unnecessary line indicating a chamfer that doesn't exist on that surface, but my eyes are not good enough to tell much more. If you want a proper critique, upload a better resolution image of the assignment, and attach your actual drawing file. Quote Link to comment Share on other sites More sharing options...
artemisrpg Posted November 18, 2014 Author Share Posted November 18, 2014 105HieuLe4-12.dwg here is the better image and the drawing file Quote Link to comment Share on other sites More sharing options...
JD Mather Posted November 18, 2014 Share Posted November 18, 2014 This is just to prompt you to find corrections. I think I am missing one other line. If you did this as 3D - you could be sure the solution was correct. Quote Link to comment Share on other sites More sharing options...
JD Mather Posted November 19, 2014 Share Posted November 19, 2014 Something like this. Quote Link to comment Share on other sites More sharing options...
nestly Posted November 19, 2014 Share Posted November 19, 2014 In addition to what JD has already pointed out: 1) in the side view, you have the 60degree angle beginning at 1.62 from the right edge when it should be 1.45 as you have correctly drawn on the top view. This of course also affects the top of the 60degree angle (green) 2) There should not be a line between the chamfers on the top view. (yellow) 3) I believe the (3) chamfers should be .25x.25, not .25 across the face of the chamfer (cyan) 4) At least one of the R.50 edges should be seen as a hidden line on the top view (magenta) Quote Link to comment Share on other sites More sharing options...
artemisrpg Posted November 24, 2014 Author Share Posted November 24, 2014 Thanks for the help guys, I was able to figure everything out. And sorry for the really late reply, I was busy and didn't have the chance to work on it. Quote Link to comment Share on other sites More sharing options...
Olina Posted November 25, 2014 Share Posted November 25, 2014 (edited) i am also a new user ,got the same question.my boss said i can do more detail.thank you for your post.then i knew where i am wrong. leder iphone 6 handytasche Edited November 28, 2014 by Olina Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.