Insertion scale of xrefs ends up as .0625 no matter what scale I set

Hi,

When I go to insert an xref in paperspace I set the insertion scale in the insert dialog box. No matter what scale I told it to be the drawing is as .0625 when I go look at the scale in the properties after I've inserted it. I can change the scale in the properties box and it changes the drawing. Any ideas? I've tried working with INSUNITS et al. but, they don't effect the problem. I'm working in AutoCad Mac 2014.

You might try setting the following and see what happens.

INSUNITS=0

INSUNITSDEFSOURCE=0

INSUNITSDEFTARGET=0

I did that and it didn't effect the problem, everything was still coming in at .0625 on inspection.

Can you post both drawings?

You might try using -DWGUNITS (use Hyphen in front) to setup the drawing.