hamidciv Posted December 19, 2014 Share Posted December 19, 2014 (edited) hi dear friend :(i draw a object and then extrude that, when i will do export , in right bottom Export symbols are not displayed and my file export As will be shown below? why autocad can not export stl format for me? plesae help me. thanks a lot Edited December 19, 2014 by hamidciv Quote Link to comment Share on other sites More sharing options...
steven-g Posted December 19, 2014 Share Posted December 19, 2014 Try typing the command STLOUT Quote Link to comment Share on other sites More sharing options...
hamidciv Posted December 20, 2014 Author Share Posted December 20, 2014 dear steven-g Run the command from the command line or via the menu Makes no difference whether. Quote Link to comment Share on other sites More sharing options...
steven-g Posted December 20, 2014 Share Posted December 20, 2014 Unfortunately that image you posted is too small to see anything useful, can you post a dwg of the model someone can see if there is any obvious problem with that Quote Link to comment Share on other sites More sharing options...
ReMark Posted December 20, 2014 Share Posted December 20, 2014 Please attach a copy of the DWG file to your next post. If you are unable to do that because of file size limitations then use a file sharing website such as Dropbox and post a link to the file instead. Perhaps there is something wrong with your model. Quote Link to comment Share on other sites More sharing options...
hamidciv Posted December 20, 2014 Author Share Posted December 20, 2014 dear remark i put link for download, please check my drawing. thanks a lot http://www.4shared.com/download/dPt8C5Rice/Drawing1.dwg?lgfp=3000 Quote Link to comment Share on other sites More sharing options...
ReMark Posted December 20, 2014 Share Posted December 20, 2014 I am not on my CAD computer at the moment so it will takes a few minutes before I can look at your drawing. Quote Link to comment Share on other sites More sharing options...
hamidciv Posted December 20, 2014 Author Share Posted December 20, 2014 dear remark The only recommendation in this case was found ,Increasing degrees to be 10 , unfortunately my problem is not solved. Quote Link to comment Share on other sites More sharing options...
ReMark Posted December 20, 2014 Share Posted December 20, 2014 dear remarkThe only recommendation in this case was found ,Increasing degrees to be 10 , unfortunately my problem is not solved. Unfortunately I am not sure what you are referring to. I just got on my CAD computer. Quote Link to comment Share on other sites More sharing options...
hamidciv Posted December 20, 2014 Author Share Posted December 20, 2014 dear remark my model is drawed in cad, whether you can not check my model? thanks Quote Link to comment Share on other sites More sharing options...
ReMark Posted December 20, 2014 Share Posted December 20, 2014 I am going to do that right now. Please give me a moment. Thank you. Quote Link to comment Share on other sites More sharing options...
ReMark Posted December 20, 2014 Share Posted December 20, 2014 OK...I exported as a STL file. Seems to have worked but I have no way of checking. This is what I get when I right-click on the file and check Properties. Are you getting the same results? What program will be used to open the STL file and can it accept DXF files? I have a project that I need to finish so I will be able from my computer for the next couple of hours. I'll check this thread later today. And please, do not send me any further PM's regarding this problem. The best place to have this conversation is in this thread where anyone and everyone who wants to participate can have the opportunity to do so. Thank you. Quote Link to comment Share on other sites More sharing options...
hamidciv Posted December 20, 2014 Author Share Posted December 20, 2014 i want import this stl format wuth flow-3d, flow-3d only read stl file, thanks for your taking time for me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.