Andrew30 Posted February 6, 2015 Share Posted February 6, 2015 Hi, My boss was working on my drawing and has somehow managed to mess it up! On drawing 101 and 102 there are lines which cut right across the building; they are not in model or paper space. I have tried turning on all my layers but they still don't appear. https://www.dropbox.com/s/7c0dewhyp5wmfxd/Beaconsfield%20Centre%20Plans%20Construction%20-%20Copy.dwg?dl=0 Any help would be most appreciated. Regards Andrew Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 6, 2015 Share Posted February 6, 2015 Are you talking about the lines that appear on layout tab 102? Quote Link to comment Share on other sites More sharing options...
Andrew30 Posted February 6, 2015 Author Share Posted February 6, 2015 Yes but I have just fixed it - used audit command which then showed up all the lines in model space. So have deleted them all now. Thank you for your quick response - it's really strange. How does it happen?! Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 6, 2015 Share Posted February 6, 2015 (edited) I think the cause is due to poor CAD practices. Speaking of running commands are your drawing I'd suggest you also run 1) Overkill (your drawing had 642 duplicate objects and an unbelievable 15099 overlapping objects) and 2) -Purge (Regapps & All). When I ran Audit on your drawing it found 269 database errors. Inexcusable. What is the source of the drawing? It appears to have some inconsistencies. Edited February 6, 2015 by ReMark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.