stenews Posted March 6, 2015 Share Posted March 6, 2015 Hi to everyone in the forum. Recently I have a problem using AutoCad 2010 MacOS X version: Every time I try to switch it to shaded or any other shade mode I can not select any objects at all Why? does it exist a workaround to by pass this bug? Any help is appreciate. Stefano Quote Link to comment Share on other sites More sharing options...
f700es Posted March 6, 2015 Share Posted March 6, 2015 Sounds like a display issue. What is the video card in the Mac? Quote Link to comment Share on other sites More sharing options...
stenews Posted March 6, 2015 Author Share Posted March 6, 2015 Hi f700es first off thanks for your reply. I always thought it was a video card issue but recently, I don't know how, it starts to work and the bug disappear. I really don't know what I did but suddenly I could move, rotate and measure any distance in a shade mode view May be I changed some variable or settings accidentally and know I don't remember which one BTW hear it is my on board video card: ATI Radeon X1600 Chipset Model: ATY,RadeonX1600 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x71c5 Revision ID: 0x0000 ROM Revision: 113-xxxxxx-158 EFI Driver Version: 01.00.158 Quote Link to comment Share on other sites More sharing options...
f700es Posted March 6, 2015 Share Posted March 6, 2015 The Ati x1600 video card is a very low end video card. Almost as bad as a low end Intel based video card. Is this a real mac or a hackintosh? I once built a Pent4 based hackintosh and it had video issues from time to time. Quote Link to comment Share on other sites More sharing options...
stenews Posted March 7, 2015 Author Share Posted March 7, 2015 it's a real Mac book pro Quote Link to comment Share on other sites More sharing options...
f700es Posted March 8, 2015 Share Posted March 8, 2015 Ok well we might to look at preferred hardware that version of cad Quote Link to comment Share on other sites More sharing options...
stenews Posted March 8, 2015 Author Share Posted March 8, 2015 hi mate, sorry for my late answer. what do you mean for preferred hardware that version of cadthanks Quote Link to comment Share on other sites More sharing options...
stenews Posted March 8, 2015 Author Share Posted March 8, 2015 okay...I get you I double checked the system requirement and it says All graphics cards of supportedhardware and my MacBook Pro is a recommended onI'm sure it's a bug or something else Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.