Jump to content

Extrim command very slow


Sandervp

Recommended Posts

Hello everybody!

 

If I want to use the "extrim" command, I do select a line first and after this I click on side next to the line.

 

After that, AutoCad does, first, zooms in very, very slow to the line I'd selected. Second, he trims all the lines next to the selected line, on the side I've chosen.

 

Finally, AutoCad zooms out very, very slow...........

 

Sometimes it takes 30 seconds or something for extrim a couple of lines.

 

I'm using AutoCad 2015 at this moment. I had also used older versions. Some versions also had this problem but in some versions it went very fast!

Zoom in, extrim and zoom out were done in 1 second.

 

Anybody knows how I can solve this?

 

 

 

(variables Edgemode=0 and Projmode=1)

 

example extrim.dwg

Edited by Sandervp
insert example
Link to comment
Share on other sites

Attach a copy of the drawing to your next post. Someone will test it on their system to see if they experience the same problem.

Link to comment
Share on other sites

Attach a copy of the drawing to your next post. Someone will test it on their system to see if they experience the same problem.

 

Example attached

Link to comment
Share on other sites

I fully expected a copy of the actual drawing not an example. But....................

 

No problem here. Probably took about a tenth of a second to complete the task.

Link to comment
Share on other sites

I fully expected a copy of the actual drawing not an example. But....................

 

No problem here. Probably took about a tenth of a second to complete the task.

 

If I use the extrim command in this example drawing (size 33.5kb), it tooks 10 seconds already before AutoCad was finished. The bigger the drawing, the longer it takes.

Link to comment
Share on other sites

Maybe you have an under-performing system.

 

Addendum:

 

I opened your drawing a second time and arrayed the horizontal lines nine additional times and stretched the one vertical (trimming) line. Then I ran the EXTRIM command. Practically the same result. The command executed in barely the blink of an eye. I then doubled the number of lines (close to 200), ran the command and attained similar results.

Edited by ReMark
Link to comment
Share on other sites

Maybe you can post your computer specifications?

 

Are you working on a network?

 

Computer specifactions:

 

 

Windows 7 SP1

Intel® Xeon® CPU E3-1220 v3 @ 3.10 GHz

RAM 16 GB

System 64-bit

 

Yes I am working on a network.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...