helpme Posted July 26, 2015 Share Posted July 26, 2015 Hi please help how to create this "Y" shape stairs in revit cuz whenever i try using stair by sketch i couldnt please help Quote Link to comment Share on other sites More sharing options...
RobDraw Posted July 27, 2015 Share Posted July 27, 2015 Break it down into pieces. You've basically got two floors, three sets of stairs, and a landing. I'm pretty sure you could treat the landing as a floor. I imagine that the bottom part that splays out is going to be tough. Let me just add that I don't use architectural Revit very often. Quote Link to comment Share on other sites More sharing options...
tzframpton Posted July 27, 2015 Share Posted July 27, 2015 Along with Rob's suggestion there's plenty of YouTube videos to help with stairs. Not necessarily "Y" configuration stairs, but enough intermediate and advanced tutorials for you to piece together what you need. Stairs can be very simple, yet they can be very complicated and require a lot of hours permeating through trial and error before they begin to really click. Also, along with Rob, I do not utilize the architectural components of Revit very often. We both are MEP. For good architectural help, you may try http://www.RevitForum.org. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.