aspitanis Posted April 12, 2016 Share Posted April 12, 2016 Hi, I got a drawing in which the markings made as attributes in the model space can bee seen, but not in paper space. They are non-printable too. How to be visible? I enclose a sample of such attributes. Attributes.dwg Quote Link to comment Share on other sites More sharing options...
RobDraw Posted April 12, 2016 Share Posted April 12, 2016 It's probably due to the annotative scaling. I haven't done much with dynamic blocks so I'm having a bit of trouble picking this apart. Quote Link to comment Share on other sites More sharing options...
steven-g Posted April 12, 2016 Share Posted April 12, 2016 set annoallvisible =1 , as RobDraw says it is the annotation scale that is the issue Quote Link to comment Share on other sites More sharing options...
aspitanis Posted April 12, 2016 Author Share Posted April 12, 2016 annoallvisible =1 was the catch! Thank you steven-g and RobDraw Quote Link to comment Share on other sites More sharing options...
RobDraw Posted April 12, 2016 Share Posted April 12, 2016 It works but it is not the proper way to do it. Ideally you should have the assigned scales for the annotative objects and the viewport be the same. What you are doing is forcing it to show a scale that is different from what is assigned to the viewport. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.