+ Reply to Thread
Results 1 to 7 of 7
  1. #1
    Junior Member
    Using
    AutoCAD 2015
    Join Date
    Mar 2016
    Posts
    18

    Default Plate 5 Section C

    Registered forum members do not see this ad.

    Hi all, anyone have any issues trying to figure exactly what P-F is looking for in the detail drawing C on Plate 5? Im kind of confused as to what they are looking for.

  2. #2
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,375

    Default

    Can we assume this is the same structural project you inquired about yesterday?
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  3. #3
    Junior Member
    Using
    AutoCAD 2015
    Join Date
    Mar 2016
    Posts
    18

    Default

    yes it is, this is the next plate for detail C sorry about this but I dont think the details are so clear at times.

  4. #4
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,375

    Default

    Did you look at any of the other threads regarding this project?

    P-F is looking for a detail of the roof at one of the vertical columns showing the cap that covers the top of the column, the vertical metal siding, the concrete roof slab with WWF 6x6, the metal decking that supports the slab and any beams and channels that would be in the immediate vicinity. The clip that secures the channel to the beam should be shown as well as the ceiling tile attached to the bottom of the channel. I'm fairly certain there are images of this detail in the Student Project Questions forum.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  5. #5
    Junior Member
    Using
    AutoCAD 2015
    Join Date
    Mar 2016
    Posts
    18

    Default

    Thanks I will look around again.

  6. #6
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,375

    Default

    Quote Originally Posted by mknj61 View Post
    Thanks I will look around again.
    Well I basically told you what they are asking to be shown in detail "C". I'd think most of it already appears on one of the building sections you drew previously.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  7. #7
    Junior Member
    Using
    AutoCAD 2015
    Join Date
    Mar 2016
    Posts
    18

    Default

    Registered forum members do not see this ad.

    thanks for your help

Similar Threads

  1. Replies: 2
    Last Post: 25th Mar 2016, 05:41 pm
  2. Section display in section view command
    By BarbM in forum Civil 3D & LDD
    Replies: 0
    Last Post: 3rd Feb 2014, 11:57 pm
  3. Replies: 0
    Last Post: 13th Sep 2013, 03:03 pm
  4. autocad cross section and long section
    By haseebsarwar42 in forum Civil 3D & LDD
    Replies: 2
    Last Post: 1st Sep 2012, 09:55 am
  5. Replies: 8
    Last Post: 20th Mar 2010, 11:42 am

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts