liquid-blue22 Posted June 7, 2016 Share Posted June 7, 2016 Hi Guys, I have been plodding along quite well, using the forum to answer most of my questions without needing to post, so thanks again for that, anyhow I am now stuck; I have been working on a 3D subsea frame and somehow I have done something to my drawing, basically when I select the frame I get a grey copy (only of the lines not the solids) in the distance in my CAD window, if I have not selected the 3D "solid" frame I can not see them but even when I have selected the frame I can't do anything with them, as soon as i try to click them I dis-select the frame and they disappear, sorry for the poor description, some screen grabs should be attached to this (note: green is the frame, grey is the problem). Thanks for any help Quote Link to comment Share on other sites More sharing options...
ReMark Posted June 8, 2016 Share Posted June 8, 2016 I believe this problem was discussed in a previous thread but at the moment I am at a loss to find it. Please attach a copy of the drawing that is exhibiting this strange behavior to your next post. Someone here will have a look at it and most likely explain what the likely cause of the problem is and/or how to solve it. Quote Link to comment Share on other sites More sharing options...
ReMark Posted June 10, 2016 Share Posted June 10, 2016 liquid: It's day three. Did you manage to determine what was happening with your drawing? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.