3rdElle Posted June 23, 2016 Share Posted June 23, 2016 Hello friends, Please help me understand, as well as, resolve my current line-type scale issue. I set my scale in model space and it appears perfect. I create a view-port in paper-space and my scale disappears. My zig-zag line-type appears continuous. Not sure if the line is actually continuous or if it is just a very very low scale factor. Please help. Kindly, Lisette Quote Link to comment Share on other sites More sharing options...
dkeran Posted June 23, 2016 Share Posted June 23, 2016 try changing the 'LTSCALE' Quote Link to comment Share on other sites More sharing options...
ReMark Posted June 23, 2016 Share Posted June 23, 2016 (edited) Attach a copy of the drawing to your next post. Someone here will take a look at it and get back to you with an answer. System variables and recommended scale factors: MSLTSCALE = 1 LTSCALE = 1 or 0.5 PSLTSCALE = 1 Just curious. Is all your model space geometry drawn full size or did you draw it "to scale" as one might do manually on a drafting board? Edited June 23, 2016 by ReMark Quote Link to comment Share on other sites More sharing options...
Dadgad Posted June 23, 2016 Share Posted June 23, 2016 Are you working in Imperial or Metric units? As ReMark has hinted, Paper Space and Model Space can have different values. I am curious what your MEASUREMENT system variable is currently set to. As you are in Connecticutt I am guessing that you are likely working in Imperial units, for which your Measurement system variable should be set to . I too would try using the LTSCALE command, in paperspace, and setting it to , then hit RE for regen, and after it updates, see if the line display works for you. Quote Link to comment Share on other sites More sharing options...
MillerMG Posted June 23, 2016 Share Posted June 23, 2016 (edited) sounds like a PSLTSCALE to me, just like ReMark stated Edited June 23, 2016 by MillerMG Quote Link to comment Share on other sites More sharing options...
3rdElle Posted June 23, 2016 Author Share Posted June 23, 2016 Attach a copy of the drawing to your next post. Someone here will take a look at it and get back to you with an answer. System variables and recommended scale factors: MSLTSCALE = 1 LTSCALE = 1 or 0.5 PSLTSCALE = 1 Just curious. Is all your model space geometry drawn full size or did you draw it "to scale" as one might do manually on a drafting board? THANK YOU! I followed the above and it all worked out. My drawing is 1:1. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.