mrtickle Posted July 13, 2016 Share Posted July 13, 2016 Hi Trying to draw a three brick 'voussoir' for the surround to a window arch in an Axonometric/Isometric drawing? Using the Path Array function but spacing seems to go all wrong. The angles are correct but the spacing is all wrong Hope that link works, many thanks in advance Quote Link to comment Share on other sites More sharing options...
rkent Posted July 13, 2016 Share Posted July 13, 2016 You won't get that to work for an isometric drawing, much better off to draw it in an ortho view and then switch the View Controls for a SW or SE iso. Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 14, 2016 Share Posted July 14, 2016 Or create a 3D model of the arch and extract the isometric view from the model. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.