Jump to content

Lost drawing in model space


Thomas Baxter

Recommended Posts

I doubt it is lost, you probably have some items way off in space, just press undo a couple of times to get back to where you were, then you need to figure out what is causing the problem, if you can post the drawing someone might be able to help figure it out.

Link to comment
Share on other sites

steven-g, as is his wont, is right on the mark. :beer:

 

Before posting the drawing, just go to Model space, Zoom Extents, then hit CTRL + A, which will select everything in the drawing, at which point you will likely see that right at two opposed edges of your screen, you will see two tiny little objects highlighted. One of those will be the digial flotsam, a bit of errant text, or anything else, which makes this happen, and on the opposite edge will be the drawing which you believe has been lost. If you still don't see it, change to Conceptual visual style, as sometimes, the color shift makes things stand out a bit more on the screen.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...