mucko_djubre Posted December 21, 2016 Share Posted December 21, 2016 Hi! In attachment is input file (dwg1). What I have to do is to connect all the lines to points so that there shall not be "holes" around the point (dwg2). Diametar of "holes" is 0,25m. EXTEND command works very well. LENGTHEN also works when i increase line by 0,25m. But this points which i need connect with lines is about few hunreds. So summary is that i need fast way or lisp that i can connect (extend) all lines to points like dwg1) so that there shall not be "holes" around the point (like dwg2). dwg1.dwg dwg2.dwg Quote Link to comment Share on other sites More sharing options...
eldon Posted December 21, 2016 Share Posted December 21, 2016 Have you tried to use PEDIT, Join with a fuzz distance of 0.6 This makes a polyline, but exploding this gives you individual lines. Probably no need for Lisp. Quote Link to comment Share on other sites More sharing options...
mucko_djubre Posted December 21, 2016 Author Share Posted December 21, 2016 Have you tried to use PEDIT, Join with a fuzz distance of 0.6 This makes a polyline, but exploding this gives you individual lines. Probably no need for Lisp. Sh*t, that really works! Thank you. Just wonder, why is fuzz distance is 0.6? Quote Link to comment Share on other sites More sharing options...
eldon Posted December 21, 2016 Share Posted December 21, 2016 The fuzz distance is the distance that limits the points that are joined by that amount. As your gap was about 0.5, I chose the fuzz distance at 0.6 to prevent unwanted joinings. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.