sbro238 Posted January 22, 2012 Share Posted January 22, 2012 Hey guys, This might seem a little ridiculous, but how can I assign the enter command to the right click in Autocad 2004? Thanks, Seth. Quote Link to comment Share on other sites More sharing options...
ReMark Posted January 22, 2012 Share Posted January 22, 2012 I think you have to edit the acad.mns file. Quote Link to comment Share on other sites More sharing options...
eldon Posted January 22, 2012 Share Posted January 22, 2012 Have you delved into your help section? There is a wealth of information there, and I don't think that you will have to dive into the menu. Quote Link to comment Share on other sites More sharing options...
Dadgad Posted January 23, 2012 Share Posted January 23, 2012 Sorry I have never used Autocad 2004, but nowadays you could do that in your OPTIONS on the User Preferences tab, RIGHT CLICK SETTINGS as shown in the attachment. Just in case you might have OPTIONS in 2004. Quote Link to comment Share on other sites More sharing options...
eldon Posted January 23, 2012 Share Posted January 23, 2012 how can I assign the enter command to the right click in Autocad 2004? This is the default behaviour of AutoCAD, so what is it doing now for you to think that it is not behaving normally. Have you checked the system variable SHORTCUTMENU? For basic behaviour, it should be set at 0. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.