Search the Community
Showing results for tags 'autocad 3d modeling'.
Found 7 results
How to create a V- Thread
akter posted a topic in AutoCAD 3D Modelling & Renderinghttp://autocadtutorialsbd.com/you-tube-video-tutorials/
AUTOCAD 3D help
HoboHeart posted a topic in Architecture & ADThi I'm using AutoCAD architecture 2012 my problem is that i imported a AutoCAD Lt drawing unit is mm and when i try to draw walls and stuff the walls are so big what can i do to rescale my drawing and getting it bigger to feet plz help I'm feeling
AutoCAD 3D modeling
Oppie posted a topic in Tutorials & Tips'n'TricksHello, I would like to share this with you, it is was my first silent tutorial on AutoCAD 3D modeling: http://www.youtube.com/watch?v=XjMzgSUL0cI It was recorded on 06 July 2009. It is better to watch in 1080p HD full screen. You can see how I use the commands FLATSHOT and SECTION PLANE to create a working drawing from 3D solids. Have fun!
Basic question: How to edit the location and radius of a hole in a block?
zmarcoz posted a topic in AutoCAD 3D Modelling & RenderingI check online that AutoCad should have a 'grips' function, but I cannot use it because 1) I cannot find the grips and 2) I want to move the hole into an accurate position. I want to do the following simple task. Please first read the attached picture. Assume now I want to edit 3D model by changing the hole center to another location and double the radius. How I can do those? (I could not find any properties to edit)
How to convert a 3d model into 2d drawings with different views?
zmarcoz posted a topic in AutoCAD 3D Modelling & RenderingI need to put my 3d model on a piece of paper, so I need to have annotate and different views (FRONT and/or TOP and/or Right) of the model. I tried to use FLATSPOT command, but all annotations (dimensions) are gone. Also, is there any easy way to do annotations? Thanks
Basic question: Cut holes from a block
zmarcoz posted a topic in AutoCAD 3D Modelling & RenderingDear all, I am new to AutoCad. I have some experience in other CAD software. Now I need to use AutoCad for a very basic task. I need to create a block (10 (x) x 10 (y) x 20 (z) ) start from (0,0,0), and then create a hole (3 units depth, radius = 0.2) at (x=2.1,y=3.3,z =20) go into the block. After that create another hole (2 units depth, radius = 0.1) at (x=10,y=6.4,z=5.5) also go into the block. I can create the block, I also use dynamic UCS to put the coordinate on the face of the block. However, I don't know how to accurately put the base point of the "circle" on the face of the block. I can only do "Click on the face" to start the base point. This is no accurate at all. I also try to put 3D location instead. In this case, the base point is fine, but the radial direction of the circle always has error. Please help.
Problem with 3D model exported from Inventor
Arvid93 posted a topic in AutoCAD Bugs, Error Messages & QuirksI worked with a 3D model in AutoCAD 2012 and then I wanted to add some variable fillets so I saved the part to be filleted as a block and the opened it in Inventor 2012 using Open > Import DWG. I added the fillets and then I used the "Export to DWG" command. I inserted the part in AutoCAD again using "Insert". I exploded the block to a 3D solid and everything looked fine but the next time i opened the dwg file it looked weird at some places (see picture). Does anyone know why this is happening?