Jump to content
araslan

I see the lines but can't select them!!!!!

Recommended Posts

araslan

I have a strange thing that recently started on a file that I've been working for a while. All of a sudden I can't select line/poly lines to modify, howe3ver I can with others on the same layer. I've noticed the lines I have problems with are generally in the same direction. Some times I can highlight but can't tag to the snap markers. I did

command and did a select – all and changed the elevation to '0' and it actually worked for a while, but it reappeared again.

When I hit regen those lines disappear and reappear again when I open the file again or when I play with the attribute display. I'm just confused, ANY IDEAS.

Thanks

Share this post


Link to post
Share on other sites
rustysilo

Maybe try running an audit and a purge on the dwg. If that doesn't work I'd give'r a restart to see if the problem remains.

Share this post


Link to post
Share on other sites
araslan

I purge and audit all the time and have restarted and still the same.

Share this post


Link to post
Share on other sites
NBC

can you post a portion of the drawing you are having trouble with please

Share this post


Link to post
Share on other sites
araslan

ok, as soon as i figure out how to post a file on the site. thanks

Share this post


Link to post
Share on other sites
araslan

I'm having problems uploading the file for some reason! it fails everytime

Share this post


Link to post
Share on other sites
cadfly

araslan,

 

I've had this happen recently also. Although i can't figure out what caused it, i can remedy it in the drawing.

try this:

1. select "CTRL"+"A" to select all.

2. delete all of the entities

3. very important step, select "OOPS", do not leave this step out.

 

Now you should be able to select the entities that were previously un-selectable.

If anyone has a fix to this, please let me know.

 

thanks

Share this post


Link to post
Share on other sites
Cad64
I'm having problems uploading the file for some reason! it fails everytime

 

See here: "How to add images to your posts"

Make sure your Cad file is under 250kb.

Share this post


Link to post
Share on other sites
AVITWeb

It's worth a shot here, but I do not think it will actually work...

 

Is your 0 (zero) layer frozen or turned off?

Same goes for defpoints

Share this post


Link to post
Share on other sites
sadhu

 

I've had this happen recently also. Although i can't figure out what caused it, i can remedy it in the drawing.

try this:

1. select "CTRL"+"A" to select all.

2. delete all of the entities

3. very important step, select "OOPS", do not leave this step out.

 

Thanks cadfly,

This one worked for me - I had a similar problem.

 

:glare:

Share this post


Link to post
Share on other sites
mokstar

Same problem happening to me!!!

Edited by Cad64
Removed profanity

Share this post


Link to post
Share on other sites
Cad64

Please mind your language.

Share this post


Link to post
Share on other sites
J3an

The same thing is happening with me, it is really weird! any solutions found?

 

I open to edit a block in block editor, but then i can't select some of the lines. I tried auditing and purging the file but nothing worked. Finally i tried orbiting the block in block editor and for some reason i could select the lines again!

 

Any idea why this is happening?

Share this post


Link to post
Share on other sites
ReMark

Without having a copy of the block to play with it's impossible to say exactly what is happening and why.

Share this post


Link to post
Share on other sites
n0tepad
It's worth a shot here, but I do not think it will actually work...

 

Is your 0 (zero) layer frozen or turned off?

Same goes for defpoints

 

thanks avitweb!

Share this post


Link to post
Share on other sites
qhabz

"reconcile" layers will solve the problem

Share this post


Link to post
Share on other sites
n0_name

i had the same problem with a few polylines ( i couldn't select them one by one with the mouse, but using quick select i managed to select them) . Audit,delete and then oops didn't work.

My polylines were on defpoints, and a few (other) layers were turened off.

 

I turned all the layers in my drawing on and then i could select them again. Don't know what the problem was, but it works now....

Share this post


Link to post
Share on other sites
ReMark

The problem was twofold. 1) Your polylines were on the defpoints layer (not a good practice) and 2) layer "0" was probably frozen.

Share this post


Link to post
Share on other sites
Net_guy

Try to change the Model or Paper Space.

Command Line: MSPACE (or PSPACE)

See if it works :geek:

Share this post


Link to post
Share on other sites
aarzoo khan

i am having the same problem. But will u pls tell me where does this "oops" option come?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×