SuperCAD Posted July 16, 2009 Share Posted July 16, 2009 I've been searching like a mad man for conduit fittings and I can't find anything compatible with AutoCAD, and very few for other programs like Solidworks. Is there a corner of the net I can go to get drawings of conduit fittings, or is anyone who may have them willing to share? I badly need a 1/2" EMT pulling elbow for a project I'm working on. Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 16, 2009 Share Posted July 16, 2009 Did you pay a visit to the CAD Block Exchange Network? Lots of content just wish it was better organized. Quote Link to comment Share on other sites More sharing options...
SuperCAD Posted July 17, 2009 Author Share Posted July 17, 2009 I would like to get 3D stuff, but 2D will suffice. I can make my own 3D blocks from it. No, I haven't looked there, but I'll go check it out now. Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 17, 2009 Share Posted July 17, 2009 In my searches of last night I wasn't able to even find any 2D conduit fittings. I tried GlobalSpec and ThomasNet. Quote Link to comment Share on other sites More sharing options...
SuperCAD Posted July 17, 2009 Author Share Posted July 17, 2009 I couldn't find anything on the site you pointed me to either. I'm just going to have to break out the calipers and radius gauges, buy a couple of fittings and model them myself. Quote Link to comment Share on other sites More sharing options...
ReMark Posted July 17, 2009 Share Posted July 17, 2009 Sorry to hear you had no luck. "...buy a couple of fittings and model them myself." That's one surefire solution. Now I know who to ask when I need one too. Quote Link to comment Share on other sites More sharing options...
SuperCAD Posted July 17, 2009 Author Share Posted July 17, 2009 Not my best work, but a quick and dirty of the fittings I needed. Quote Link to comment Share on other sites More sharing options...
deres Posted July 17, 2009 Share Posted July 17, 2009 This might help: http://www.boltproducts.com/index.php Quote Link to comment Share on other sites More sharing options...
SuperCAD Posted July 17, 2009 Author Share Posted July 17, 2009 I checked that site yesterday and couldn't find much of anything related to EMT conduit. Quote Link to comment Share on other sites More sharing options...
deres Posted July 17, 2009 Share Posted July 17, 2009 You are right...I just searched the site. Anyway, good luck. If I find somethig I'll let you know. Quote Link to comment Share on other sites More sharing options...
SuperCAD Posted July 17, 2009 Author Share Posted July 17, 2009 Sweet, thanks! Quote Link to comment Share on other sites More sharing options...
SuperCAD Posted July 23, 2009 Author Share Posted July 23, 2009 Here's a 90 degree pull elbow I just modeled. It's for 3/4" EMT conduit. Still have to add the screws though. Quote Link to comment Share on other sites More sharing options...
Rick Willits Posted January 23, 2012 Share Posted January 23, 2012 http://www.tnb.com/ps/reg/reg.cgi?ca=corp&action=login&referer=/ps/fulltilt/index.cgi?part=5223 thre years late Quote Link to comment Share on other sites More sharing options...
tzframpton Posted January 23, 2012 Share Posted January 23, 2012 http://www.tnb.com/ps/reg/reg.cgi?ca=corp&action=login&referer=/ps/fulltilt/index.cgi?part=5223 thre years lateAutoCAD MEP has all these fittings, not to mention all the routing tools for conduit anyway. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.