humaironline Posted August 26, 2009 Share Posted August 26, 2009 I want to make taper in two faces but i cant do it yet now. Kindly check my problem in picture and advice me. Quote Link to comment Share on other sites More sharing options...
fuccaro Posted August 26, 2009 Share Posted August 26, 2009 Try with Solidedit>Face>Rotate If you try to modify just a corner, draw a line first and use Solidedit>Face>Imprint to create the edge. After that you can rotate the face around that. Quote Link to comment Share on other sites More sharing options...
humaironline Posted August 26, 2009 Author Share Posted August 26, 2009 Sir, cant understand it...can you tell any another way... Quote Link to comment Share on other sites More sharing options...
fuccaro Posted August 26, 2009 Share Posted August 26, 2009 Enter in the command line SOLIDEDIT AutoCAD will prompt you to select an option. Enter F for face, and R at the next prompt. Now AutoCAD will ask you the faces to rotate. Click the face I marked with A in the drawing and press enter. As rotation axis click the end points B and C. Finally enter the desired angle -I entered 15 (I think) fallowed by an enter. If you wish to draft only a part of the face, first draw the line L (on the initial solid!) and use the sequence Solidedit>Body>Imprint to make a new edge on the solid. After that, proceed as above. Quote Link to comment Share on other sites More sharing options...
Patrick Hughes Posted August 26, 2009 Share Posted August 26, 2009 Or, your sketched line would suggest you need to chamfer the object. Look into the CHAMFER commend. Quote Link to comment Share on other sites More sharing options...
fuccaro Posted August 26, 2009 Share Posted August 26, 2009 Or you can create an other solid and SUBTRACT it from the one you have to cut down the corner. But I think the CHAMFER is the shortest way. Quote Link to comment Share on other sites More sharing options...
humaironline Posted August 27, 2009 Author Share Posted August 27, 2009 still not done...i am trying continuously...its showing random another shape...not my required taper face. Quote Link to comment Share on other sites More sharing options...
humaironline Posted August 27, 2009 Author Share Posted August 27, 2009 i have done it by champher...thanks you very much. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.