Jump to content

help in using (slice)


kuwait

Recommended Posts

Boy, this problem looks very familiar. I believe we solved it already! LOL

 

Have you tried using Slice with the Surface option?

 

You're in luck this time. At least they gave you the angle (30 deg).

Link to comment
Share on other sites

yeah, I seem to remember helping someone with a very very similar problem... Must be same class.

 

slice.jpg

 

Anyway just extrude a line into a surface and slice...

 

KC

Link to comment
Share on other sites

how?

i tried but i couldnt

 

Have you gone through the tutorials in my signature?

 

Attach what you have completed so far.

Link to comment
Share on other sites

how?

i tried but i couldnt

 

Draw a line at the angle you want in a plan view. Extrude the line to a surface, then "Slice" using the surface option and separate.

 

slice.gif

 

KC

Link to comment
Share on other sites

There is another way to do this than the slice command! You can use the rotate faces command! Here is what you need to do! You go to Modify>Solid editing>Rotate Faces, and then you follow the steps shown below:

ACAD.gif

Link to comment
Share on other sites

Also why to draw a line for slicing? You can enter 3 point's coords from the fly. If the UCS is like in CAD89's drawing, rotate it with -90deg. around OY (so X is along the extrusion direction).

Click for the first point, somewhere on the base edge.

@0,0,1 for the next point, and

@1

 

I wrote this because the question was about slicing. An other way to skin this cat: draw a box, rotate it in the right position and subtract it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...