frankie78 Posted September 2, 2008 Share Posted September 2, 2008 Hi guys, I've recieved a file and the ucs is on an angle for the north side, and is set on world. I always type UCS then view and the icon goes to the normal x and y axis. I did this to one of the drawings that I recieved and the ucs goes back to the normal 2D x and y axis but the actual mouse icon stays on the angle and a straight line is drawn on that angle. How do I change it back to x as 0 deg and y as 90 deg?? Thanks Quote Link to comment Share on other sites More sharing options...
papagyi Posted September 2, 2008 Share Posted September 2, 2008 Type in command line "plan" "enter" "enter". Quote Link to comment Share on other sites More sharing options...
Tiger Posted September 2, 2008 Share Posted September 2, 2008 or it could be SNAPANG that's not set to 0 Quote Link to comment Share on other sites More sharing options...
frankie78 Posted September 2, 2008 Author Share Posted September 2, 2008 Thanks guys, Yes it was SNAPANG Thanks heaps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.