jcaz15 Posted September 26, 2008 Share Posted September 26, 2008 Hi. I am trying to "copy" an old plan about a geotechnical thing, I almost finish it, but I want to separate every zone using colors, first I think to use the dot hatch pattern (colors), but I have been thinking that using the solid hatch will be better, but a question arrise. Is it possible that all other objects can be printed over the solid hatch????? I suppose that this question in quite easy, but I am not so good using autocad. TX. Quote Link to comment Share on other sites More sharing options...
ReMark Posted September 26, 2008 Share Posted September 26, 2008 Maybe this might be of some help. It's taken directly from AutoCAD Help. DRAW ORDER: Sets the draw order of the hatch. The following prompt is displayed: Enter draw order [do Not change/send to Back/bring to Front/send beHind boundary/bring in front of bounDary] : Enter an option Send to Back Sends the hatch in back of all other objects Bring to Front Brings the hatch in front of all other objects For further information consult Help. This is the first place you should turn to when you encounter a problem. Quote Link to comment Share on other sites More sharing options...
jcaz15 Posted September 26, 2008 Author Share Posted September 26, 2008 Hi. ReMark, I tried the help zone, and also tried the same procedure, but it did not work. hope there is another way to do dthat. Tx. Quote Link to comment Share on other sites More sharing options...
ReMark Posted September 26, 2008 Share Posted September 26, 2008 Draw order can be designated in the Hatch and Gradient dialog box under Options. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.