gpktm Posted March 22, 2011 Share Posted March 22, 2011 Greetings everyone. I was trying to draw the enlacements of a wire rope by applying the hatch command but when I facing curves, the hatch needs to rotate somehow. Is it that possible? I manage to do it by using "measure" command and then with a use of a block, align it to path and then enter the segment length. (Attached image) But I was wondering if there is a way to do it with hatch command or any other method. Quote Link to comment Share on other sites More sharing options...
JBullseye74 Posted March 22, 2011 Share Posted March 22, 2011 Not that i am aware of..... thats how i would have achieved it as you have. Quote Link to comment Share on other sites More sharing options...
CyberAngel Posted March 22, 2011 Share Posted March 22, 2011 Here's a suggestion. Define a linetype with a diagonal line. You could start with the standard Zigzag type and turn it into Zig. Draw a polyline that follows the midline of the wire. Assign the Zig linetype to that polyline. Quote Link to comment Share on other sites More sharing options...
gpktm Posted March 22, 2011 Author Share Posted March 22, 2011 Yes, good idea. That way it will be available without doing the procedure every time. Thanks mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.