Jump to content

Using Associative Dimensions


Recommended Posts

  • 3 months later...
  • Replies 23
  • Created
  • Last Reply

Top Posters In This Topic

  • irneb

    8

  • SLW210

    4

  • mor424mont

    2

  • raapabustan

    1

Top Posters In This Topic

Posted Images

  • 9 months later...
bjenk8100

Well,

 

I have never adjusted dims from 0,1, or 2 that I knew of. However, to make things work very easy, I setup a new dim style and make it annotative. In my dim style I choose a text style that is also annotative if that matters. I choose my individual preferences of precision, fit, units etc. Now all I have to do is go into model space. After I draw something I figure out my viewport(s) scale. Then back in model space. Whatever scale I had chosen I change annotative scale to that and then dimension. Typically does not fail. I do the same with leaders. As far as annotative blocks, I am not there. I have them all drawn 1 to 1 in model space. If I want to bring it into a drawing that I am doing at 1/8"=1'-0" I would have to scale the block by 96. If there is text in the block all hell breaks lose though. Still a newb to annotative blocks.

Link to post
Share on other sites
Well,

 

I have never adjusted dims from 0,1, or 2 that I knew of. However, to make things work very easy, I setup a new dim style and make it annotative. In my dim style I choose a text style that is also annotative if that matters. I choose my individual preferences of precision, fit, units etc. Now all I have to do is go into model space. After I draw something I figure out my viewport(s) scale. Then back in model space. Whatever scale I had chosen I change annotative scale to that and then dimension. Typically does not fail. I do the same with leaders. As far as annotative blocks, I am not there. I have them all drawn 1 to 1 in model space. If I want to bring it into a drawing that I am doing at 1/8"=1'-0" I would have to scale the block by 96. If there is text in the block all hell breaks lose though. Still a newb to annotative blocks.

I agree with you ... though there are some issues regarding the use of annotative dims / leaders. Especially if you start adding extra scales onto the same dim/leader/text. Stuff like mirroring and stretching starts to play havoc with the positioning of the annotations. Also many have found issues with anno scales themselves. So a lot of people simply refuse to use them. BTW, I'd advise you use a text style for the anno dim, which is non-annotative and it's default height set to 0. That way you only need one single setting (in the dimstyle) to define the text's height - else you'd run into issues there too.

 

This thread is simply meant to show the alternatives available - not necessarily an either-or situation. As both DimAssoc=1 and 2 is still available with annotative dims also.

 

If you notice, I did mention annotative in my OP (original post).

 

Anyhow, this is a rather old thread now. Since then I've done very little in AutoCAD. 90% of my work is now in Revit.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...