Mark_CV3D Posted April 25, 2012 Share Posted April 25, 2012 Hello! I have some new problems ( I think I´ll run into problably 20 new problems every day) that makes me confused. I have attached som photos of the problems. My corridors daylightrockcut and their lanes sometimes streches away to be somewhere in china, but i live in sweden. And my corridors are very spiny(?) when i look at them in 3d views, but my corridor surfaces lookin good. Any one have any idea of what im doing wrong here? thanks! Quote Link to comment Share on other sites More sharing options...
CyberAngel Posted April 25, 2012 Share Posted April 25, 2012 This may not match your issue, but there is a known "feature" in Civil 3D. If the end of your corridor goes beyond the end of your alignment, even by a miniscule amount, the corridor dives down to elevation 0. The fix, of course, is to adjust the alignment. The "spiny" part, I believe, is just the random mismatch between a manufactured surface (your corridor) and the existing surface. Quote Link to comment Share on other sites More sharing options...
Mark_CV3D Posted April 27, 2012 Author Share Posted April 27, 2012 Thx for reply! In this case that wasnt the solution. I have managed to get rid of some of the "lanes-streches-away-to-china"-syndrome by editing corridor-frequency (removed some of the "add section in geometry-points" and stuff). Its timeconsuming but it seems to help. The spiny part however is still there when looking at corridor in 3d-view. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.