ripgrif Posted April 26, 2012 Share Posted April 26, 2012 I have moved a mesh off to the side while I work on the 3d solid substructure the mesh covers. Now I need to move the mesh back, but it will not select the end "corner" of the mesh so I can place it back into position. This was not a problem in the past (2008), but it doesn't work in our current version of AutoCad 2009. Is there a system variable or setting I need to set? Quote Link to comment Share on other sites More sharing options...
paul7 Posted April 27, 2012 Share Posted April 27, 2012 set osnaphatch to 1. that will allow you to pick points (nearest, end, parallel, mid, etc) inside a hatch pattern. Quote Link to comment Share on other sites More sharing options...
ripgrif Posted April 27, 2012 Author Share Posted April 27, 2012 Thanks Paul, No luck. It is really odd, I can select many of the interior intersections of the mesh, but I can usually only select one corner of the mesh. Unfortunately it isn't usually the corner I need to move/copy the mesh to its new location. This is the weirdest thing. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.