Jump to content

Technician, drafter or designer?


SuperCAD

Proper title for CAD users?  

106 members have voted

  1. 1. Proper title for CAD users?

    • CAD Technician
      58
    • CAD Designer
      75
    • CAD Drafter
      48
    • Other (specify)
      35


Recommended Posts

I made a suggestion to my supervisor the other day that we should be called CAD Technicians, rather than CAD Designers. All four of us in the CAD department are split down the middle on this one. Myself and one other person think that Technician is more appropriate, while the other two seem to think that the word technician implies that we're on the same level as the mindless laborers on the shop floor. They basically said "designer's use their brains, and technician's use their hands" (loosely translated, since I can't remember the exact words).

 

So which is the better title for a CAD position?

Link to comment
Share on other sites

  • Replies 137
  • Created
  • Last Reply

Top Posters In This Topic

  • SuperCAD

    14

  • ReMark

    9

  • GypsyQueen

    9

  • Teeds

    6

Top Posters In This Topic

Posted Images

... but maybe to give an insight to what each Title presents on why ive chosen it.

In my Point of View- Coz this became a debate also with our positions;

CAD Technician- position more aquianted with the mechanics of CAD, LISP Building, Scripts, Troubleshooting.

Draftsman- a position more aquianted with Drafting Standards, Presentation Techniques, Contract Requirements in Drawings, Documentations etc.

CAD Designer- a position knowlegable in CAD and also centered in Designing. eg, Design and Draft Floor Plans, Design and Draft Structural Plans whereas a Draftsman is only concentrated in Drafting.

 

Another Position that would have a general experience with all would be Preferred as a CAD Manager, Though usually CAD Managers are also strongly linked to CAD Technician

Link to comment
Share on other sites

Some companies call entry level CAD operators technicians. I've also seen CAD Draftsman used to denote the same as well. CAD Designer implies greater responsibility in terms of input. An engineer may approach the designer with an idea and after some discussion leave the majority of the design to him/her.

Link to comment
Share on other sites

CAD Technician- position more aquianted with the mechanics of CAD, LISP Building, Scripts, Troubleshooting.

Draftsman- a position more aquianted with Drafting Standards, Presentation Techniques, Contract Requirements in Drawings, Documentations etc.

CAD Designer- a position knowlegable in CAD and also centered in Designing. eg, Design and Draft Floor Plans, Design and Draft Structural Plans whereas a Draftsman is only concentrated in Drafting.

 

Another Position that would have a general experience with all would be Preferred as a CAD Manager, Though usually CAD Managers are also strongly linked to CAD Technician

 

Would this also be the hierarchy of position ranking too?

Technician is the low man on the totem pole, Draftsman is one step above, Designer is near the top and Manager is at the top of his game? Is there an established ranking of position in CAD?

 

To me, CAD Designer is kind of a misnomer since we aren't designing CAD. We're only using CAD as a tool to complete our work. Not to mention the fact that most of the "designers" that we get plans or information from don't really know what they're doing and their thoughts aren't based on reality. I don't feel comfortable being associated with those kind of people. I'm not just making pretty pictures to "WOW" people with.

 

Where I work, there are basically three levels of CAD user:

 

1. General user (pretty much all of us at this point).

2. Lead user (what I'm trying to get promoted to next week).

3. Manager (what I'm looking to do in the future, maybe next year).

 

I'm just trying to find the best title for each position that seems appropriate and professional.

Link to comment
Share on other sites

Where does a 'CAD Technologist' fit into this.:?

 

Also: As we say Architect and not CAD Architect, shouldn't we just say Draughtsperson. They've always done a fair share of designing.

:(

 

Someone once said 'The trouble with computers is that by amplifying the production of the user the user makes the error that they are more capable than they are.:geek:

 

I shouldn't try and get involved in..... :wacko:

Link to comment
Share on other sites

CADD = Computer Aided Drafting and Design.

 

Right...we don't design CAD. But we use CAD as our main tool for design purposes. I guess it is all semantics no matter what way you look at it.

 

Hey, as long as I have a job they can call me anything they want. What's in a title anyway?

Link to comment
Share on other sites

Would this also be the hierarchy of position ranking too?

for draftsman and CAD technician, no. you could almost say that they are on the same footing based on the level of education that these two defined positions have accomplished, only their job definitions are different.

one way to differentiate would be to view a draftsman that has no background in CAD but can still produce standardized drawings using only the crude drafting tools- such a person is still referred to as a Draftsman. CAD technicians are viewed more as individuals knowlegable in the workings of CAD, its programming, etc.

But then again nowadays, these two w/c you have separated could also be merged and are only recognized generally as "Draftsman", differences are just to the amount of knowledge and skill the induvidual posesses in drafting.

Link to comment
Share on other sites

not to put anyone down that has a job title that includes "technician"..but I cant stand it when im called a cad technician....back in the day, technician actually had meaning but these days they use it for every job title to make it sound more lucrative...sanitation technician (trash man), food prep technician (fast food), etc...

 

my vote is for any of the option EXCEPT CAD Technician

Link to comment
Share on other sites

In my office I'm referred to as a CAD Technician. I agree with Hotrodz, as it is an overused title today. I feel that designer is a better title.

Link to comment
Share on other sites

Forget taking CAD onto the title. You are a Draftsman or you are a Designer. Both positions need to know how to use CAD efficiently. If a person only knows CAD and not the practical application of drafting or design, then perhaps CAD User is appropriate.

 

"I know Excel, I must be an Computer Aided Accountant Technician."

Link to comment
Share on other sites

Judging by examples of CAD drawings a couple of vendors have sent me I suggest that in some instances the letters C A D should mean Computer Aided Dork. It's obvious they have had no formal drafting experience of any kind yet they have been entrusted to make a drawing using a computer and some software.

Link to comment
Share on other sites

i see CAD Engineer used in many job advertisements these days,

 

It would be illegal for us to call ourselves engineers since we aren't licensed. The only way we could use the terms engineer or architect was if we were licensed and had a stamp.

 

What about CAD Specialist?

Link to comment
Share on other sites

Most positions i have seen are just drafter, designer and so on... Some companies even go the extent to have drafters, designer I, designer II, and designer III. I am looking at a designer II job.

Link to comment
Share on other sites

I had a look in the dictionary to see if I could get some clarification:

 

Main Entry: cad Pronunciation: kadFunction: noun

 

Etymology: unskilled assistant Date: 1833

 

8)

Link to comment
Share on other sites

I had a look in the dictionary to see if I could get some clarification:

 

Main Entry: cad Pronunciation: kadFunction: noun

 

Etymology: unskilled assistant Date: 1833

 

8)

 

 

that wasnt "cool" grain please re-frain from being a funny man in the future leave the funny comments to me.

 

Knock Knock

Who's there !

Ya !

Ya who ?

I didn't know you were a cowboy !

 

man im so god dam hilarious

Link to comment
Share on other sites

I'm guessing titles are different over there

 

'technician' is a perfectly acceptable job title (or part of) over here

 

'engineer' is a word that's far too overused here - and it drives me nuts as every other profession has a protected status (eg doctor, architect etc). In this country 'engineer' can be applied to any div with a spanner

 

anyway - I'm a CAD operator (otherwise known as a CAD monkey :D )

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...