Mike_Taylor Posted August 16, 2013 Share Posted August 16, 2013 We are loking at Liquid cooling the new system we are going to buy. Looking at primarily cooling he CPU and GPU and possibly the RAM block. I have found a pretty awesome externally mounted reservoir and pump assembly for the cooling. I am not concerned about mounting a CPU cooling block, but my concern is with the GPU mounting block, I was wondering if anyone has any experience doing this before. Quote Link to comment Share on other sites More sharing options...
ReMark Posted August 16, 2013 Share Posted August 16, 2013 I just put a garden hose in one of the empty hard drive bays. Quote Link to comment Share on other sites More sharing options...
Dadgad Posted August 17, 2013 Share Posted August 17, 2013 I just put a garden hose in one of the empty hard drive bays. Got any pictures? Quote Link to comment Share on other sites More sharing options...
Handiman Posted August 23, 2013 Share Posted August 23, 2013 I used a Corsair Hydro 80 on my i5-3570k (77w) running at 4.2Ghz and stays less than 95 degrees F. When doing a lot of crunching it will go up to 125 after 3-5 min. in a stress test. But never above. It has a small 120mm radiator and 2 fans (Push-Pull) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.