Jump to content

Section MV parts in Autocad MEP


CDJ3410

Recommended Posts

hi everyone, hope someone can help.

 

 

I am using Autodesk MEP 2014.

 

 

I have made an AHU by using MVparts, and am now trying to generate a section through the AHU and the associated ductwork.

 

 

The ductwork shows up fine, but the only thing that shows up for the MV part is the drain connector?

 

 

Is it possible to actually section and MVpart?

Link to comment
Share on other sites

Tanner, thanks for your reply.

 

 

I had another look at this last night, found I could generate a section by using different settings within the section dialog box.

 

 

I think I was using the wrong display set up?, so I will hit the book again and see what went wrong.

 

 

The file is attached, so any advice or help you could give would be greatly appreciated.

 

 

Thank you

 

 

CDJ

 

 

https://www.dropbox.com/s/8vbc4d087vkdomc/P188-Ground%20Floor%20Plan%20-%20Standard.zip

Link to comment
Share on other sites

Thanks Tanner, i was playing around with this some more last night,

I found out i had used the wrong settings (display setup) in the section dialog box.

 

The part now shows in the section, i have attached a link to the drawing anyway, any help or comments you could offer would be greatly appreciated

 

https://www.dropbox.com/s/8vbc4d087vkdomc/P188-Ground%20Floor%20Plan%20-%20Standard.zip

 

CDJ

Link to comment
Share on other sites

Thanks Tanner, i was playing around with this some more last night,

I found out i had used the wrong settings (display setup) in the section dialog box.

 

The part now shows in the section, i have attached a link to the drawing anyway, any help or comments you could offer would be greatly appreciated

 

https://www.dropbox.com/s/8vbc4d087vkdomc/P188-Ground%20Floor%20Plan%20-%20Standard.zip

 

CDJ

Drawing looks good. Glad you got it working after all. :)
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...