Jump to content
dusko

Full round fillet problem

Recommended Posts

dusko

I try to do full round fillet on sweep faces but I get distortion on the base of helix.

Also I am having problem on filleting edges with 0.02mm on those runners.

I should work in inches but i didn't change units so i work in mm.

 

SolidWorks 2012

full round.jpg

propeler_PACKANDGO.SLDPRT

Share this post


Link to post
Share on other sites
shift1313

I didn't open the file but most likely its a geometry problem. There are several options in a sweep such as Keep Normal Constant, or Twist with Path. Depending on your geometry and the helix you will need to evaluate your options. If you want a full round on it i suggest you draw it in the sketch before the sweep. Also you can change the file units at any time or enter in any unit in the dimension dialog. For instance if you file is in mm but you have something specific that needs to be 2.5inch. In the pop up or sketch dimension just type "2.5in" or use the units drop down. If you enter "2.5" it will take the units of the file such as mm. You can also directly enter simple formulas without creating equations or global variables. Example "2.5in + .55mm" and it will create that for you, in this case 64.05mm.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...