Dinochrome Posted January 22, 2016 Share Posted January 22, 2016 (edited) Does six months a Zombie thread make? I found a different thread in a different sub-forum in which someone had asked a very similar, but somewhat different question. I thought I'd start my own thread rather than pollute his. I am learning Inventor. I have been tasked with a sample job to draw. I have been going through an organized Tutorial Program my employer has footed the bill for. I have also watched a lot of Neil Cross "TFI CAD" videos. He makes it easy to understand. My task is to create production drawings of an assembly draw in 2D AutoCAD like a manufacturer might show to an Architect for approval. The output is to be 3D modeled in Inventor for production. As I've been bringing my parts across, they are coming scaled down like they are drawn in millimeters. In AutoCAD when I check a dimension it shows inches and there aren't any strange setting in the DIMSTYLES that I can find. They are set to inches. The donor AutoCAD file had INSUNITS set to 4. I switched it to 0. That didn't seem to change the behavior. This is the Zombie thread: Insert Units Thread I have not tried this: Editing Acaddoc.lsp Any enlightenment would be appreciated. --------------------------------------------------------------------------------------- As an aside, re: Neil Cross's work; here is an example of a well done tutorial on the steering wheel. I've used it like a wood saw on a steel pipe for years... I posted a remark on it here a couple days ago. It's after hours and I'm doing a little self-improvement time and wanted to share this. Edited January 22, 2016 by Dinochrome un-gunking my grammar Quote Link to comment Share on other sites More sharing options...
Dinochrome Posted January 22, 2016 Author Share Posted January 22, 2016 More enlightenment... My drawing in question: -DWGUNITSDrawing units: 1. Inches 2. Feet 3. Millimeters 4. Centimeters 5. Decimeters 6. Meters Unit for length : *Cancel* Quote Link to comment Share on other sites More sharing options...
Dinochrome Posted January 22, 2016 Author Share Posted January 22, 2016 So, I soiled my sandbox copy.... Command:-DWGUNITS Drawing units: 1. Inches 2. Feet 3. Millimeters 4. Centimeters 5. Decimeters 6. Meters Unit for length : 1 Drawing unit display formats: 1. Scientific 2. Decimal 3. Engineering 4. Architectural 5. Fractional Linear display format : Architectural linear display precision formats: 0. 1" 1. 1/2" 2. 1/4" 3. 1/8" 4. 1/16" 5. 1/32" 6. 1/64" 7. 1/128" 8. 1/256" Linear display precision : Scale objects from other drawings upon insert? [Yes/No] : Match INSUNITS to drawing units? [Yes/No] : ** WARNING: you have changed the unit for this drawing database. ** ** All new objects will be drawn according to the new unit, but ** ** existing objects will not change size unless you specifically ** ** ask to have automatic scaling occur. ** Scale objects in current drawing to reflect change in units? [Yes/No] : Include objects in Paper Space? [Yes/No] : Scaling the entire database... Scaling AecDbObject(s)... Scaling entities in Model Space... Scaling entities in Paper Space... Scaling entities in Paper Space... Scaling entities in Paper Space... Scaling entities in Paper Space... Command: Z ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window/Object] : e Command: *Cancel* It didn't go well. My frame was 5", is now 3/16", and stuff is still inserting into Inventor at scale factor 0.03937. Quote Link to comment Share on other sites More sharing options...
Dinochrome Posted January 22, 2016 Author Share Posted January 22, 2016 Trial and error! But next time I need it, I have it here! Command: -DWGUNITSDrawing units: 1. Inches 2. Feet 3. Millimeters 4. Centimeters 5. Decimeters 6. Meters Unit for length : 1 Drawing unit display formats: 1. Scientific 2. Decimal 3. Engineering 4. Architectural 5. Fractional Linear display format : Architectural linear display precision formats: 0. 1" 1. 1/2" 2. 1/4" 3. 1/8" 4. 1/16" 5. 1/32" 6. 1/64" 7. 1/128" 8. 1/256" Linear display precision : Scale objects from other drawings upon insert? [Yes/No] : Match INSUNITS to drawing units? [Yes/No] : ** WARNING: you have changed the unit for this drawing database. ** ** All new objects will be drawn according to the new unit, but ** ** existing objects will not change size unless you specifically ** ** ask to have automatic scaling occur. ** Scale objects in current drawing to reflect change in units? [Yes/No] : N Command: Quote Link to comment Share on other sites More sharing options...
Dinochrome Posted January 22, 2016 Author Share Posted January 22, 2016 My happy little pieces are cooperating and coming in pleasantly. I adjusted the AutoCAD side. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.