Jump to content
Dani_Nadir

Coordinates LISP

Recommended Posts

Dani_Nadir

Hello,

 

I am looking for the next lisp. I need to create a plline (for example a rectangle) wherever I want inside the model. Then, the routine will ask me about the distance between coordinate tic marks (x) , the plot scale (1/500 for example) and the height text. Then I will click the rectangle and finally it will create all the coordinate tick marks inside the rectangle as an editable objects (block for example) with its coordinates N (vertical) and E (horizontal). I am attaching a dwg

 

 

 

Thanks,

 

Best regards,

 

Daniel.

1.dwg

Share this post


Link to post
Share on other sites
ronjonp

You could use an attributed block with field. See attached. You will need to regen to see the contents update when you move the block.

1.dwg

Share this post


Link to post
Share on other sites
halam

I certainly choose a WCS orientated field over a text. Good use of fields give better assurance that the coordinats are right. I recognize my own blocks when i see them on a piece of pdf. Welcome Daniel, this CAD forum has some great users and ideas. You will learn a lot from it propably.

Share this post


Link to post
Share on other sites
Dani_Nadir
You could use an attributed block with field. See attached. You will need to regen to see the contents update when you move the block.

 

Hello,

 

Thanks for replying.

It's a nice field block. So I have to move it wherever I want, isn't it? i would want to run the command, to select a rectangle plline and it will generate the coordinates according to the space between tick marks (10m, 20m, 50m....) and scaled according to the plot scale (1/500, 1/1000...). Also it will ask me the height text, and the position of the N and E will be vertical and horizontal respectively (as you saw at the drawing). The idea of tick mark blocks liked to me! It could be a general matrix.

 

Best regards,

Daniel

Share this post


Link to post
Share on other sites
Dani_Nadir
I certainly choose a WCS orientated field over a text. Good use of fields give better assurance that the coordinats are right. I recognize my own blocks when i see them on a piece of pdf. Welcome Daniel, this CAD forum has some great users and ideas. You will learn a lot from it propably.

 

Hello,

Thanks for you welcome. I expect to learn a lot from this page, although I am not a native english speaker hehe.

so, you use coordinates field, but, how do you place it at the righ position? I think a routine could be faster in that work, making automatic coordinates wherever you need.

 

Best regards,

Daniel.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...