Jump to content
sarah96

Fire Call Point Symbol

Recommended Posts

sarah96

Hi!

 

I was wondering if anyone knows where I could download a fire call point symbol for free? Or how I could go about drawing one?

 

search?q=fire+call+point+autocad+symbol&safe=strict&rlz=1C1ASUM_enGB718GB718&tbm=isch&source=iu&ictx=1&fir=chJPErNk5HdrEM%253A%252CEKSrjpB-q3uBLM%252C_&usg=AFrqEzftbIm5hSXd-MWsXWdDd4vr2F_HOA&sa=X&ved=2ahUKEwiJoqOy_ezcAhWKAcAKHevqCp8Q9QEwBHoECAYQCg#imgrc=chJPErNk5HdrEM:

Share this post


Link to post
Share on other sites
ReMark

There is one available here. I downloaded and opened it. Seems fine.

 

https://www.linecad.com/fire-alarm-call-point/

 

Note: The drawing was done using imperial units. It roughly measures 18x22 inches. Scale it to suit.

Share this post


Link to post
Share on other sites
sarah96
There is one available here. I downloaded and opened it. Seems fine.

 

https://www.linecad.com/fire-alarm-call-point/

 

Note: The drawing was done using imperial units. It roughly measures 18x22 inches. Scale it to suit.

 

 

Thanks so much - lifesaver!!

Share this post


Link to post
Share on other sites
sarah96
There is one available here. I downloaded and opened it. Seems fine.

 

https://www.linecad.com/fire-alarm-call-point/

 

Note: The drawing was done using imperial units. It roughly measures 18x22 inches. Scale it to suit.

 

Can you tell me how to get rid of all the layers it comes with? - there are loads!!

Share this post


Link to post
Share on other sites
ReMark

I just checked. The drawing I downloaded has two layers: 0 and one called http://www.linecad.com.

 

If your version has "loads" of layers then you might try using the Layer Merge command.

Share this post


Link to post
Share on other sites
sarah96
I just checked. The drawing I downloaded has two layers: 0 and one called http://www.linecad.com.

 

If your version has "loads" of layers then you might try using the Layer Merge command.

 

Thank you!

Share this post


Link to post
Share on other sites
BIGAL

I did not down load but looked you could just make a block,a bit of time in drawing the outlines then just use Solid hatch with the colour set to a true Red say 10. Its just one of those things search around for an hour or spend 10 minutes making it. For me screen grab re-scale and draw over top.

 

We had a situation one staff member spent 2 1/2 hrs looking for something I found out said stop we recreated the patched together requirement for a meeting later that day in 1/2 hour. Yes if we had the original 5 minutes work, but staffer on holidays. She came back we updated master copy. The moral to the story be careful how many hours we spend looking for something.

 

But nice one Remark.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×