todski Posted July 4, 2020 Share Posted July 4, 2020 Hi i need some help with trying to understand what im doing wrong, what im trying to do is alter the size of the outer block say from 600mm to 1200mm and i want the inner squares to alter size proportionally. in the drawing attached is 2 blocks the left block works this was created by some one else , the block on the right is what i have done but i dont know what im missing i think i have copied the lines like the left block but it wont work. the drawing was done in autocad 2021 saved as 2013 any help would be appreciated many thanks Drawing.dwg Quote Link to comment Share on other sites More sharing options...
steven-g Posted July 4, 2020 Share Posted July 4, 2020 Check the distance multiplier in the properties for each of the stretch actions, see if you can now spot the difference. Quote Link to comment Share on other sites More sharing options...
todski Posted July 4, 2020 Author Share Posted July 4, 2020 thank you so much spent hours on it yesterday Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.