Benjamin Posted May 13, 2022 Share Posted May 13, 2022 Hi! My question is the following: Can C3d be forced to place a ditch on the side slope of an embankment? I need to give continuity to a ditch that comes from a cut condition until reach the discharging point. I tried using the BasicSideSlopeCutDitch command to do it, but i can't. Do you have any advice? Thank you, for your help! Benjamin Quote Link to comment Share on other sites More sharing options...
CyberAngel Posted June 20, 2022 Share Posted June 20, 2022 Have you tried the DaylightBasin subassembly? You can pretend your ditch is a basin and interrupt the slope, then continue the slope to the existing grade. You can define the slope or the width of either side of the ditch. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.