line width of internal walls

[rami_9630]

Hi all ,
im creating ctb for our office and i am wondering abt the line width of internal walls for different drawing scales 1/50 1/100 1/200 , i checked many cad standards on the web and most of them assign (0.5 mm) to internal wall but i cant figure out which scale it belongs to , they mention things like full scale or A1 scale and it is confusing , like i can use many different drawing scales (1/50 1/100 1/200 .....etc) on A1 , in fact line width of 0.5 for internal wall looks fine for wall thickness of 15 cm and 20 cm but for 10 cm thickness with 1/100, 1/200 scales , the wall edges look so close and seem to b like one thick line
hope someone can help me in this

[v4cad]

Hi all ,
im creating ctb for our office and i am wondering abt the line width of internal walls for different drawing scales 1/50 1/100 1/200 , i checked many cad standards on the web and most of them assign (0.5 mm) to internal wall but i cant figure out which scale it belongs to , they mention things like full scale or A1 scale and it is confusing , like i can use many different drawing scales (1/50 1/100 1/200 .....etc) on A1 , in fact line width of 0.5 for internal wall looks fine for wall thickness of 15 cm and 20 cm but for 10 cm thickness with 1/100, 1/200 scales , the wall edges look so close and seem to b like one thick line
hope someone can help me in this

Do you mean line width of internal walls for different drawing scales 1/50 1/100 1/200 ? :oops:






------
design software (http://www.softsea.com/software/Design.html)

[rami_9630]

ya exactly , i want to know the line thickness i should assign to the internal walls when plotting at each those different scales

[gonnaw]

wall width is 150mm minimum as far as i remembered, so in 1/50 scale that would be 3mm, in 1/100 that would be 1.5mm and in 1/200 its 0.75mm...