PDA

View Full Version : Template help


dboy413
1st Aug 2008, 05:42 pm
does anyone know how to set my personal template file to open instead of "drawing 1"???
cpriedel
1st Aug 2008, 05:53 pm
make sure your Template File is saved as .dwt than you just have to go to tools -> options -> Tab "Files" -> scoll down to "Template setting and browse to the path where you have your template saved under "Default template for sheet creation and Page setup override".
(not 100% thats the one maybe "Drawing Template file location" instead).
We just have a Standard .dwg file that we open and start working on. We never start a new drawing via Autocad only via explorer and "save as" to the desired location.
Hope that helped.
dboy413
1st Aug 2008, 09:02 pm
Thanks i'll give it a shot
dboy413
1st Aug 2008, 11:27 pm
Man thank you so much!! That worked perfectly:)
cpriedel
1st Aug 2008, 11:52 pm
Sweet! Glad to help
s_wypych
9th Sep 2009, 08:26 pm
Save your template as the acad.dwt in the template folder. Acad.dwt is always your startup template.
ian25
31st Oct 2009, 06:30 am
how do i can get your standard template here in the website so i can use it to my projects for easy insertion of templates
s_wypych
2nd Nov 2009, 04:18 pm
You need to create the template with the standards that you wish to use, once you have it created then save it as acad.dwt and place it in the template folder. It is then your startup template. I would also a copy of it with a distinctive name in the same template folder that way at any time you can change any template to your acad.dwt. If you use the same template for long periods of time it's a convenience to have it open on startup rather than have to do File, New and choose your template everytime that you want to open it.
ian25
3rd Nov 2009, 07:57 am
thanks 4 your reply...can i ask you how to put my designs of template in design center to create my own tool palette?
ian25
3rd Nov 2009, 08:00 am
examples of my templates are my own design of walls,doors,window,etc.
how can i used it as startup templates,ill just copy/paste it from the a new drawing?
s_wypych
3rd Nov 2009, 05:38 pm
You can create a .dwg full of the blocks that you desire to have on the tool palette. Place the .dwg in the Design Center folder, then right click on the .dwg and choose Create Tool Palette.