autocack Posted February 10, 2009 Posted February 10, 2009 Ok I am assuming i use array but not sure how... i have a 22m long section which 32 reinforcing bars in it the first two need to be at a spacing of 477mm (centre to centre) and the last two at 750mm...with the spacing of those inbetween varying linearly as you move along the length... Any ideas of how i can do this easily in CAD? Quote
JBullseye74 Posted February 10, 2009 Posted February 10, 2009 Not unless there is a lisp command where you can input your distances.... The array command does this in equal increments.... The Measure OR Divide command also equal spacings....Erm thats all i got, copy them dude! Quote
rkent Posted February 10, 2009 Posted February 10, 2009 Ok I am assuming i use array but not sure how... i have a 22m long section which 32 reinforcing bars in it the first two need to be at a spacing of 477mm (centre to centre) and the last two at 750mm...with the spacing of those inbetween varying linearly as you move along the length... Any ideas of how i can do this easily in CAD? I used an arbitrary arc to divide, then transfered the node locations down to the line, finally copying to the endp of each line. ? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.