Problem in rotaion of attribute in Dyanamic block

hi .....friends

i have problem with rotation of attribute in dynamic block

if somebody know that plz help me ..

u have attached my block

actually this is my first dynamic block ...

but plz check that also.

ML.dwg

Tell us a little more about what you want the block to do.

-Which part do you want to rotate?

-Around what point?

-Do you want the attribute and text to rotate?

I guessed and made some changes to the block, but not knowing how you are going to use it makes it difficult.

Glen

wag.dwg

Hi Glen, please could you downsave your attached file. It is set to be a 2010 type file; not that many people on here will have that version of CAD yet.

Whuups, I guess the block editor does not use the same settings as regular save does.

I resaved it to 2004 format, I'm not sure what version dynamic block functions were added.

wag.dwg

i m using 2008

so plz give me that format

and i want to rotate whole block about insertion point/ base point of that block

my problem is when i used to rotate my block by using rotate point which i have given in dynamic block.....

sorry but im also confused to much.....

but i have done some thing .......even i dont know what i have done?

now that att is rotating here is another file ...plz chk this.

ML-updated.dwg

I'm far from a DBlock expert, but it looks like you have 2 rotation parameters on the block. I think that rotate1 is the action that does what you want to do. I also think that by moving the angle indicator to the right side of the rotation point, the angle that you enter would make more sense - 0 degress is flat and right side up, 90 is up and down, 180 would be flat and upside down, text and attribute on the left side.

I changed it as described above and reattached it, saved as a 2004 format.

When you assign the action to the parameter, make sure that you follow the prompts. When you select the objects, select all the objects that you want to rotate.

ml-updated.dwg

Hi sir,

first i would like to say thanks for taking some valueable efforts for me.

ya..i wil follow wht instructions u have given, and changes u have done are ok.