TheCan Posted September 11, 2009 Posted September 11, 2009 Hi! I'm in the process changing from CAD2008 to Civil3D and I've come across a problem I don't understand. When copying from a drawing (in Civil3D) to another drawing (also in Civil3D) the lines get scaled with a factor of 1000. I don't have this problem if I try to do the same thing with the same drawings in CAD2008. The only thing I could think of was INSUNITS, INSUNITSDEFSOURCE and INSUNITSDEFTARGET but even after changing them it doesn't work. Any suggestions? Quote
ScribbleJ Posted September 11, 2009 Posted September 11, 2009 the INSUNITS- commands are for xreference attachment and how they react to the units of the drawing your attaching them to. The line scaling issue sounds like something that LTSCALE would solve. Also check MSLTSCALE and PSLTSCALE as those are affected by the annotative scale. If they are set to a value of 1 the annotative scale will control how the lines look. Quote
TheCan Posted September 14, 2009 Author Posted September 14, 2009 The annotative scale are the same in both drawings, MSLTSCALE and PSLTSCALE are set to 0 and LTSCALE to 1, but the same problem occurs when copying. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.