Franny Posted March 15, 2017 Share Posted March 15, 2017 Hi All, Hope you can help me. I'm working on floor plans & when I insert some blocks they are so tiny that I have to scroll in to find them. However in the same drawing some blocks are fine and insert the correct size. I have checked the insertion point, scale & rotation and they are the same #'s. Any advise would be gratefully appreciated. Big thanks Franny Quote Link to comment Share on other sites More sharing options...
RobDraw Posted March 15, 2017 Share Posted March 15, 2017 The blocks themselves may be the issue. I don't want to tell you what to do because I am not familiar with the blocks. Quote Link to comment Share on other sites More sharing options...
rkent Posted March 15, 2017 Share Posted March 15, 2017 Are your blocks individual drawing files? The blocks and the drawing you are inserting them into need to have the same INSUNIT setting. Quote Link to comment Share on other sites More sharing options...
samifox Posted March 16, 2017 Share Posted March 16, 2017 it seems like your blocks were drawen at a scale that is different from the host drawing. Quote Link to comment Share on other sites More sharing options...
RobDraw Posted March 16, 2017 Share Posted March 16, 2017 There are so many variables involved, including poorly built blocks, that, without access to the blocks in question, we can only speculate. Quote Link to comment Share on other sites More sharing options...
ReMark Posted March 17, 2017 Share Posted March 17, 2017 You could always end all the speculation and attach a copy of your drawing and a copy of one of the troublesome blocks to a subsequent post. We would need .dwg files not image files (ex. - .jpg or .png). Understand? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.