jamos Posted June 14, 2017 Share Posted June 14, 2017 Good day to all. I asume my problem is not a " new" one, but i cant find similar requests on the forum. My mouse, which worked just fine, started to behave irregular. When using a command, e.g. erase, and starting to select the first object to erase I never get to do it. I mean the first click does not select any objet. I have to click twice which is quite awkward. It is the same with align, move, ... I do not know if there is any clicking variable or similar to modify this. Sometimes it select the option with the first click and sometimes i have to slowly click it is second or third time. I thaught that i am drawing to fast, and that i release my button only after i have moved awag from the icon, but that is nit the case. It is simply a case of sometimes it doesnt react the first time and then i have to click again. This is very annoying. Any advice on this? Thanks Quote Link to comment Share on other sites More sharing options...
CyberAngel Posted June 14, 2017 Share Posted June 14, 2017 The mouse itself is an obvious culprit. Try a different one and see if you get the same behavior. Check the PICKFIRST system variable. Sometimes variables switch on or off because of scripts, or as far as I can tell, for no reason at all. Another thing to check is the size of your pickbox. Quote Link to comment Share on other sites More sharing options...
jamos Posted June 15, 2017 Author Share Posted June 15, 2017 Thanx , ill check that and report back What is pickfirst supposed to be set at? Quote Link to comment Share on other sites More sharing options...
ReMark Posted June 15, 2017 Share Posted June 15, 2017 PICKFIRST = 1 Did you try swapping out the mouse for another one? That's the first thing I would have tried. Quote Link to comment Share on other sites More sharing options...
jamos Posted June 15, 2017 Author Share Posted June 15, 2017 Hey Remark. Yes i have actually tried several mouses. Some work better than ather but relating to my problem, no difference. It is as if acad is happy if i makle selections/ clicks with some small period in between, maybe a second or so. Maybe i just go to fast. I noticed that any mouse, only act when you release the button, not when you press it, so i make sure to release the button on the icon and not after i have moved away. But stil sometime i have to click it a second or third time. Today i actually swithced to my Caddie program out of frustration Quote Link to comment Share on other sites More sharing options...
Dadgad Posted June 16, 2017 Share Posted June 16, 2017 (edited) Hey Remark. Yes i have actually tried several mouses. Some work better than ather but relating to my problem, no difference. It is as if acad is happy if i makle selections/ clicks with some small period in between, maybe a second or so. Maybe i just go to fast. I noticed that any mouse, only act when you release the button, not when you press it, so i make sure to release the button on the icon and not after i have moved away. But stil sometime i have to click it a second or third time. Today i actually swithced to my Caddie program out of frustration Take a look at your Selection Tab in OPTIONS. Including Allow Press and Drag on Object. Personally I like Implied Windowing, so I only need to click when defining the starting point of the crossing window. Or might this have to do with the setting of Time Sensitive Right Click on your User Preferences tab? Are you selecting with a crossing window? Edited June 16, 2017 by Dadgad Quote Link to comment Share on other sites More sharing options...
jamos Posted June 16, 2017 Author Share Posted June 16, 2017 Take a look at your Selection Tab in OPTIONS. Including Allow Press and Drag on Object. Personally I like Implied Windowing, so I only need to click when defining the starting point of the crossing window.YES, I ALSO DO SELECTION LIKE YOU. SELECTING ON THE DRAWING SCREEN, I.E. FROM LEFT TO RIGHT (BLUE) OR FROM RIGHT TO LEFT ( GREEN) IS NOT AN ISSUE. MY PROBLEM IS WHEN I USE THE ICONS AT TOP, FOR INSTANCE, ROTATE, LINE, PLINE, OFFSET, ETC. IF I CLICK ON AN ICON AND MOVE AWAY TO PERFORM THE ACTION I NOTICE THE CLICK/ SELECTION DIDN'T HAPPEN, SO I HAVE TO DINIT AGAIN OR AGAIN. I HOPE I EXPLAINED IT SO THAT IT'S CLEAR Or might this have to do with the setting of Time Sensitive Right Click on your User Preferences tab?NO, RIGHT CLICK IS NOT AN PROBLEM . I HAVE SET AT THE STD OF250 MILISECONDS AND THAT IS JUST FINE Are you selecting with a crossing window? Quote Link to comment Share on other sites More sharing options...
tombu Posted June 16, 2017 Share Posted June 16, 2017 Please don't SCREAM! Careful you're not dragging off the button when you click. As it's a graphics selection it could be a graphics card thing. When your mouse moves across the ribbon do the buttons highlight as you pass over them or is their a delay? Quote Link to comment Share on other sites More sharing options...
RobDraw Posted June 16, 2017 Share Posted June 16, 2017 I've seen this type of behavior in Revit, also. I wonder if it's some sort of conflict with a recent Windows update. Quote Link to comment Share on other sites More sharing options...
jamos Posted June 16, 2017 Author Share Posted June 16, 2017 Hey Tombu, it really wasn't my intention to SREAM...... i only used capital letters because ive copied the text and was replying inline, to make my text standing apart from the rest. I apologize I will check out that delay effect your talking about when moving across the ribon buttons, im not at my computer right now, but will give feedback on that. I also thaught i was probably dragging off the buttons because I'm going too fast so thaen i started to concentrate on that, maybe sometimes it was due to that, but no, it is not the cause of my problem I have recently updated my graphics card to the latest, nvidea gtx 960 m. Quote Link to comment Share on other sites More sharing options...
jamos Posted June 16, 2017 Author Share Posted June 16, 2017 Not sure. My program worked fine after my last update, i do my updates manually. And this mouse behaviour only started recently Quote Link to comment Share on other sites More sharing options...
SLW210 Posted June 19, 2017 Share Posted June 19, 2017 Not sure. My program worked fine after my last update, i do my updates manually. And this mouse behaviour only started recently Wouldn't hurt to roll back an update or go to a previous restore point to check it out. Do you have all of the AutoCAD updates? This sounds like a problem to submit to Autodesk. Quote Link to comment Share on other sites More sharing options...
jamos Posted June 19, 2017 Author Share Posted June 19, 2017 A coincidence tbat you mentioned this, it's exactly what i did today and it seems if the problem is gone. I haven't do much work since the restoring of the system but it didnt bother me after that. Maybe it was some bug or something that crept into my system, i don't know Ill keel an eye on it. Thanx for all of you for assisting me Quote Link to comment Share on other sites More sharing options...
Aftertouch Posted June 19, 2017 Share Posted June 19, 2017 Is your commandbar 'floating0/transparant' or is it docked? When it is floating, both the mouse and spacebar can have strange behavior. When the commandbar is docked all things usualy work fine again. :-) Quote Link to comment Share on other sites More sharing options...
jamos Posted June 20, 2017 Author Share Posted June 20, 2017 This sounds very interesting. Mine is floating and i will definitely dock it and check this out. Will let you know by tomorrow afternoon. Thank you Quote Link to comment Share on other sites More sharing options...
Aftertouch Posted June 29, 2017 Share Posted June 29, 2017 Did it work? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.