nicolas Posted August 22, 2017 Share Posted August 22, 2017 Hi all, I have just completed modelling a shop in 3D (Walls and Furniture) in Autocad through I have not add any materials. I need to add Toys, Children Clothes and Mannequin, Decorative Features such as Lollipop, Umbrella... Can anybody advise where I need to go to there those 3D block? Thanks. Quote Link to comment Share on other sites More sharing options...
Cad64 Posted August 22, 2017 Share Posted August 22, 2017 I don't think you're going to have much luck finding those types of models for Autocad. You would be better off working in 3ds Max or some other 3D program to do this type of work. Take a look at Turbosquid. They might have some CAD models: https://www.turbosquid.com Quote Link to comment Share on other sites More sharing options...
nicolas Posted August 22, 2017 Author Share Posted August 22, 2017 Yes I know how difficult, almost impossible it is to find such materials in Autocad. What I want to know is whether Sketchup will be more helpful. Quote Link to comment Share on other sites More sharing options...
Cad64 Posted August 22, 2017 Share Posted August 22, 2017 What I want to know is whether Sketchup will be more helpful. Maybe. Have you searched the 3D Warehouse? I just did a search for "Toys" and found a lot of content: https://3dwarehouse.sketchup.com/?hl=en Quote Link to comment Share on other sites More sharing options...
welldriller Posted August 23, 2017 Share Posted August 23, 2017 You could take a look at the site below they seem to have a lot of mannequins http://www.storesupply.com/c-609-mannequins.aspx?gclid=EAIaIQobChMIhfKUiqrs1QIVBgdpCh2tDwKdEAAYAiAAEgKSfPD_BwE&gclsrc=aw.ds Quote Link to comment Share on other sites More sharing options...
ReMark Posted August 23, 2017 Share Posted August 23, 2017 welldriller: Did you not read the post? The OP is looking for AutoCAD 3D blocks not the physical objects he mentioned. Quote Link to comment Share on other sites More sharing options...
welldriller Posted August 24, 2017 Share Posted August 24, 2017 welldriller: Did you not read the post? The OP is looking for AutoCAD 3D blocks not the physical objects he mentioned. Dang you got me again ReMark Quote Link to comment Share on other sites More sharing options...
nicolas Posted September 7, 2017 Author Share Posted September 7, 2017 Thanks. I have completed the shop in 3D and import it in Sketchup to add materials and rendered in Vray. I am having lots of trouble with this application having very little knowledge about it. I have been able to apply wall paint. But I am having quite difficulty as the glazing is opaque when rendered, given the furniture, wall, shelves and tiles are all white again another set of problem. Getting the components from the warehouse, also lots of problem they are in different units and different position. If anybody can help me on having 600x600 (mm) floor tiles to the floor (white) and having the glazing solved in vray, that will be just great. Is there anything missing regarding the component in the warehouse. Quote Link to comment Share on other sites More sharing options...
Cad64 Posted September 7, 2017 Share Posted September 7, 2017 If you have Sketchup questions you should ask them in the Sketchup section here: http://www.cadtutor.net/forum/forumdisplay.php?34-SketchUp Have you watched any of the free tutorials on the Sketchup site? https://www.sketchup.com/learn/videos/826 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.