+ Reply to Thread
Results 1 to 5 of 5
  1. #1
    Forum Newbie
    Discipline
    Construction
    Using
    AutoCAD 2016
    Join Date
    Oct 2017
    Posts
    1

    Default Isometric and Oblique views

    Registered forum members do not see this ad.

    Hi. I need help in drawing the isometric and oblique views of my assignment. Can somebody please help me as I need to pass this unit to be able to proceed to the next one. Attached are the drawings. Thanks
    Attached Files

  2. #2
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,447

    Default

    What have you drawn so far? Post a screen shot or, better yet, attach a copy of the drawing you are currently working on to your next post.

    Do you know how to create a 2D isometric drawing in AutoCAD?

    Do you know what the significance is of the dashed lines in three of the four objects you are supposed to draw?

    Were you also told what an oblique view is and shown how to draw one?

    In the future, if you are going to attach something to a post either make it an image file (ex. - jpg or png) or an actual drawing (.dwg) file as not everyone has MS Powerpoint installed on their computers. Thank you.
    Last edited by ReMark; 30th Oct 2017 at 12:00 pm.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  3. #3
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,447

    Default

    Did your instructor demonstrate how to create an isometric view using AutoCAD?

    Isometric view of support bracket.

    ISO_SupportBracket.JPG
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  4. #4
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,447

    Default

    Oblique view of connecting piece. I used an angle of 30 degrees and the depth was shortened to 3/4 of the length shown in the diagram. I could have used an angle of 45 degrees and cut the depth to 1/2 of the length shown or any combination of the two angles and depth. Did your instructor suggest an angle and depth ratio to use?

    Oblique view conn pc.JPG
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  5. #5
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,447

    Default

    Registered forum members do not see this ad.

    jaden: What progress have you made so far? If you were expecting someone here to draw everything for you I doubt that will happen. Since it is your assignment you are the one who has to put forth the effort. We can assist you by answering your questions and demonstrating techniques but ultimately it is up to you.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

Similar Threads

  1. Problem in Isometric Views!!!
    By alijahed in forum Autodesk Inventor
    Replies: 10
    Last Post: 27th Mar 2015, 06:37 pm
  2. Problem with Isometric Views
    By 2KCM in forum Student Project Questions
    Replies: 5
    Last Post: 5th Sep 2013, 12:09 am
  3. Oblique,isometric,auxillary views. How to ?
    By Grafilthy in forum AutoCAD Beginners' Area
    Replies: 19
    Last Post: 2nd Apr 2012, 05:27 pm
  4. Various isometric views/drawing views
    By WagglyFawn in forum SolidWorks
    Replies: 2
    Last Post: 25th Nov 2009, 09:41 pm
  5. isometric views
    By jhiltibidal in forum AutoCAD Drawing Management & Output
    Replies: 3
    Last Post: 29th Dec 2007, 06:49 pm

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts