ziele_o2k Posted April 26, 2018 Share Posted April 26, 2018 Hi everyone. I have idea for lisp that will work as follow: Select block with atts Select destination block and if this block will have atts with same names, insert fields from firstly selected block Example: Select source block: Name: BLK_1 Atts: Att_1 Att_2 Att_5 Select destination block: Name: BLK_2 Atts: Att_1 (replace textstring by field with textstring from BLK_1's att named Att_1) Att_3 (do nothing) Att_4 (do nothing) Att_5 (replace textstring by field with textstring from BLK_1's att named Att_5) Att_6 (do nothing) Any ideas, where to start - this is my first attempt to play with fields. I found some functions with fields at LeeMac's website, I will study them but in meantime, maybe some tips / links to similar problems? Quote Link to comment Share on other sites More sharing options...
Grrr Posted April 26, 2018 Share Posted April 26, 2018 Actually its a simple task - all you have to know is how to assign a field with a TextString property. I had this idea before (after the pain of renaming constantly blocks that represent the same room in floor plans/section views). But I don't think its worth posting free work just like that (ideas would be enough). With the skills you have, you should be able to execute it (just learn from LM's codes how to work with fields). Quote Link to comment Share on other sites More sharing options...
ziele_o2k Posted April 26, 2018 Author Share Posted April 26, 2018 Actually its a simple task - all you have to know is how to assign a field with a TextString property.(...) You were right. It was quite easy Quote Link to comment Share on other sites More sharing options...
BIGAL Posted April 27, 2018 Share Posted April 27, 2018 I was thinking of pick blk1 pick blk2 then enter 1,1 5,5 3,4 etc so last updates 3 into 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.