kippax Posted June 22, 2018 Share Posted June 22, 2018 (edited) I have a large number of drawing and they all appear in model space as the image below. Is there a setting change I could make to adjust the axis and drawing simultaneously in order that that they are both orientated NSEW ? https://drive.google.com/open?id=1G-jflvhI_mfI_WSshmgmD5qsskHWadPK Edited June 22, 2018 by kippax Quote Link to comment Share on other sites More sharing options...
steven-g Posted June 22, 2018 Share Posted June 22, 2018 You could just type "plan" and hit enter, which will alter the screen to line up with the current UCS Quote Link to comment Share on other sites More sharing options...
BIGAL Posted June 23, 2018 Share Posted June 23, 2018 Maybe Steven, if the dwg is tru co-ords then pick a line that you want as the e-w axis, just do UCS OB "pick line left side", I also recommend extra UCS S "viewname" if you open a layout tab and mview again UCS R "viewname" PLAN then set the scale and all done, you can change the Model view as well if you want by typing PLAN to accept the ucs you have just set. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.